Can You Use Acrylic Paint On Metal? [Most Comprehensive Guide]

Looking for a detailed answer on your doubt “can you use acrylic paint on metal or not”? We havegot you covered.

As a durable medium, acrylic paint is perfect for a wide range of artistic endeavors due to its ability to resist fading and washability on a number of surfaces.

Canvas, denim, leather, and a slew of other materials can all be painted with it. As well as furniture and outdoor fixtures created from a wide range of materials, it can also be employed on a larger scale for industrial applications.

Can you use acrylic on metal? Yes, it is entirely safe to apply to metals. Because it’s water-based and permanent, metal may be acrylic painted.

Acrylic paint is an excellent choice for both small-scale projects and larger-scale customization. If you’re looking to get creative, you can choose from many formulae that can be used both outside and inside.

Preparation, however, is required before applying acrylic paint to a metal surface. Please make use of the pointers and instructions we provided in the following paragraphs to make your endeavor a success.

Keep Reading: Using Acrylic Paint On Fabric Surface

Why Manufacturers Paint Metals

Metal goods manufacturers always paint metal before they sell them. Do you know why? This is one of the reasons why you must paint metal. Check it out here.

Quality Improvements Of Products

Better coating and uniformity: For a more consistent, edge-to-edge, and edge-to-edge coating application, coil-coating metal sheets are the best option. Coil coatings must be applied uniformly in order to produce consistently high-quality end products.

Corrosion-Resistant: If metal objects are painted on both sides, they are protected against corrosion in a better way since there are no missed patches that can occur if the paint is applied after it has already been painted. Rust can be tough to control if it originates in a hard-to-reach place, resulting in poor product quality.

Both-Way Coverage: Instead of spraying or applying paint exclusively to one side, as is familiar with post-printing treatments, coil-coated steels usually are coated on both sides.

Suitable For Complex-Forming: For complex forming, prepainted metals retain exceptional resistance to marks by maintaining their durability and necessary flexibility for intricate shaping. Many coil-coated metals are predicted to endure at least 50 years, with weather resistance, color fading, corrosion, dirt, chemical changes, wear and tear, as well as wear and tear.

Mar-Resistant: Because of their improved durability and portability, prepainted metals are ideal for use in a wide range of applications. Coil-coated metals have a perfect surface for a stunning finish on completed items compared to post-painted metal.

For Saving Costs

When manufacturers outsource their metal to coil coaters, they get a host of advantages in terms of both time and money. Some important advantages of prepainted metal include:

Manage Capital Equipment: It is expensive to ship, position, and install coil-coating apparatus, as well as to maintain and maybe upgrade the equipment. A continual process of fine-tuning coil coating equipment is required to achieve precise laminating and coating requirements.

Staff’s Engagement In Operations: Allowing the factory to focus on core operations and eliminating the need to teach employees on post painting processes is a benefit of using a coil coating specialist. Customers may be nurtured, and business opportunities expanded since the streamlined supply chain.

Improves Cycle Durability: Assemblies can be delayed or even halted altogether if drying, painting, and curing procedures are slowed down due to the absence of dry durations in prepainted metals. Reducing bottlenecks in the process and improving processing times can greatly enhance cycle duration and productivity.

Reduces The Need For Support: There’s no doubt that a coil coating process or post painting can consume significant space that could be put to better use elsewhere in the factory.

Lesser Risk For Environment: Coatings and industrial adhesives must be used, stored and disposed of properly. To avoid severe fines, companies must adhere to all environmental standards imposed by Environmental Protection Agency.

Keep Reading: Cardboard Painting With Acrylic Or Spray Paint

What Type Of Paint Can You Use On Metals

Painting metal is an option that we are considering. Numerous variations abound, comparable to those seen in traditional paints, each having its own set of proprietary components, each manufactured by a separate company.

The higher the quality, the more expensive your paint will be, regardless of the brand or your budget. The cheapest option isn’t always the best one when it comes to metal paint because there are some excellent budget-friendly solutions out there.

Painting metal can be a challenge; you’ll need either metal-specific paints or paints that can be used on metal as well as other surfaces. Look at the several types of paint that may be used on metal.

Oil Paint

This is the ideal sort of metal paint since it is long-lasting and stain- and mark-resistant. Once coated, the surface can be maintained and utilized to hide any imperfections.

To get the most outstanding results when painting metal, it’s a good idea to use a primer first. On the other hand, oil-based metal paint can be applied without priming. Using a primer almost always results in a more level surface.

Oil-based paint has some drawbacks, including the fact that it fades and is more expensive than other choices. Additionally, they are combustible and emit an offensive stench when used.

Painting metal fences, grills, outdoor furniture, and window frames with oil-based metal paint can improve their appearance. Alkyd resins, pigments, and solvents are the main components of oil-based paints.

The noxious odor is emitted by the solvent. Curing to a tough surface that can survive staining and flooding is the primary benefit of using this sort of paint.

Keep Reading: Extensive Guide On Using Acrylic Paint On Skin & Nails As Well

Water Paint

There have been water or latex-based paints on the market for some time now, and many people prefer them. Acrylics, rubber-based composites, and vinyl are the primary constituents of these paints.

The drying period of water paints is one of their most popular advantages. Cleaning them is a breeze, and they do not emit any smells or smoke. They are also non-flammable. Additionally, cleaning your painting utensils is a breeze once you’re done.

As a result, it’s a more practical and safer alternative to oil-based paints in every respect. Water-based paints can have some drawbacks, however. Unlike oil-based paint, water-based paint can lead to corrosion if applied straight to the product without a primer.

For this reason, you should first coat the metal surface with oil-contained primer before painting. In addition, oil-based paints outlast water-based paints in terms of durability.

It’s easy to clean latex paints, but oil-based paints are even easier. Latex paint has difficulty adhering to the metal’s smooth surface when painting metal.

As a result, appropriate paint to surface adhesive necessitates the use of a primer. Bed frames, nightstands, and wall brackets are good candidates for this style of metal paint.

In addition to being less expensive, water paint is also more fade-resistant than the alternatives.

Metal Paint

Oil-based metal paint is the most durable, although water-based metal paint has its place as well. Ultimately, you’ll have to choose a finish for your surface based on metal.

A wide range of choices is available, each with varying levels of durability and resistance. It’s important to know how the metal surface will be exposed to the elements.

The answer to this question is both yes and no. Should it be exposed to the elements, such as the sun and rain? We recommend using a gloss finish for surfaces that are frequently cleaned or exposed to harsh weather conditions.

On the other hand, a matte finish will look great on less-frequently-washed surfaces. The semi-gloss finish is frequently the most excellent option because it is more versatile and may be used in a variety of settings.

It’s easy to clean with soapy water, and it’s also quite long-lasting. Most of the time, oil-based paint that comes with a semi-gloss finish is the ideal option for painting metal.

How To Decide The Best Paint For Metal

Choosing the color is the initial step in applying acrylic paint to metals. There are a few things to keep in mind when it comes to acrylic paint with metal.

All kinds of materials can be used, from canvas to wood to cloth. Because of this, using a product specifically made for metal bodies is the wisest course of action.

A wide variety of acrylic paints can be used to paint metal. However, the final decision is up to you and what you intend to paint.

Are you looking for a metal roof, a garage door, or something else? If you’re painting something that will be exposed to the elements, like outdoor furniture, you’ll need paint that will withstand moisture, corrosion, and ultraviolet rays.

Rain, snow, sunlight, and other weather factors will take a toll on these objects. If the topcoat is not tough enough, the metal beneath will be destroyed and exposed as a result of the environment.

Painting something that will be exposed to extremely high temperatures may be a possibility for you. Heat-resistant paint is needed to avoid scorching and peeling in this situation.

For example, vents, grills, and other metal objects around the fireplace can be painted. Avoid using easily combustible paints.

If an item is going to be utilized indoors, it doesn’t need as much protection because it will be touched, moved, or harmed. Bedposts, metal décor, indoor frames, and the like all fall under this category.

Can You Use Acrylic on Metal?

Acrylic paints may be used on a wide range of materials, including plastic, wood, and metal. Using acrylic paints on any metal can be used for a range of creative endeavors, such as:

  • Jewelry
  • Wall decor
  • Models
  • Metal art

DIY jobs around the house, such as painting metal, may necessitate the use of paint.

  1. Chairs
  2. Bed posts
  3. Tables
  4. Outdoor furniture
  5. Cabinets
  6. Desks
  7. Fences
  8. Lamps
  9. Shelves
  10. Door knockers

To paint metal, you must first prepare the surface. This is true regardless of which project you undertake first. Depending on the metal you’re working with, you’ll need to take a different approach to prime and sealing.

Most outdoor acrylic paints, for example, come in spray cans with sealer already included. To put it another way, they don’t require that you seal the paint. However, rusty old metal objects may necessitate the application of a priming coat. You might also find our guide helpful in painting leather surface with acrylic paint.

Preparation Is The Key For Painting

After deciding on a paint color, you’ll need to prep your metal surfaces. Sealing off any sections on the object that you do not intend to paint are the first things you should do.

Depending on the form and size of the object, you may use painter’s tape, masking tape, or old newspapers. This guarantees that the paint only reaches the desired locations. If you’re going to tape off paint and manage the edges, then Painter’s Tape is your best bet.

Locking technology makes it highly secure. No water leaks over the edge of the property. You may also take your time because the paint can be removed without having any sticky residue for weeks after painting.

Precautions must be taken before getting started, such as putting on gloves, an apron, and a respirator mask. When inhaled, the following job’s dust can result in potentially life-threatening conditions.

Next, the surface needs to be cleaned. There must be no blemishes or imperfections on the metal before the acrylic paint may attach to the surface.

  • The first step in caring for new metals is to properly wash them in warm, soapy water, using a sponge or towel. There are additional actions to be taken before cleaning aged metal.
  • Remove the old paint from the metal before you begin cleaning it. Cleaning it with a wire brush or sandpaper will work just fine. Sanding away any rusty areas is also necessary.
  • Using grit sandpaper is the best way to get the task done. Silicon carbide is used to build the tool, which is designed to remove rust, paint, and dents off automobiles.
  • When it comes to sandpaper, 220 sand grit is the optimum grade for smoothing and leveling your metal before painting.
  • Wire brushes from reputable brands are the best option for long-term use, according to us. For the most demanding welding duties, they are made of carbon steel and stainless steel wires. They can remove any rust, paint, corrosion in only one pass.
  • The metal can be cleaned with water and soap, rinsing well and drying well once the first paint has been removed.
  • Next, use sandpaper to sand the metal surface to a smooth finish. Using a moist cloth, sand the surface again. Using a moist towel, clean the surface again and allow it to dry.
  • Soap and scrubbing are unnecessary for metal goods such as tags or jewelry. With a soft cloth with acetone or alcohol wipes, you can get the thing clean faster than with a sponge. Sanding is required for all of these things as well.

Do not overlook this step, even if the metal appears to be clean. You could miss unpleasant dirt and residue if you look at it simply. And if left unattended, the acrylic paint’s ability to adhere to the metal will be compromised.

Your project will not be harmed in any way if you clean the surface thoroughly before beginning. Your paint will stick better to the metal if you clean it thoroughly.

As a last resort, you might apply a detergent mix to guarantee that oil should be removed from the surface. Alcohol wipes can also be used to speed up the process of cleaning the surface. Then, let it dry for a second time.

Keep Reading: Things To Know About Baking Acrylic Paint

Priming The Metal

To get the best results, you must first use a primer. Choose an acrylic paint primer that works well with it. Just be sure that the primer is designed for metals before applying it. If you use the wrong primer, you won’t get the effects you want.

Acrylic metal paint requires a primer in addition to the paint itself. A primer serves as a barrier. Before painting, it’s typically used as a primer to help the colors last longer. Paint or associated chemical components can damage metal surfaces, which can lead to corrosion and oxidation.

You have the option of purchasing a two-in-one paint and priming or a primer on its own. Just make sure it’s compatible with acrylic and metal paints, at the very least.

  • To get the best results, use the same brand of acrylic paint and primer. You won’t have to do a lot of studies or guessing to find out if a certain combination is appropriate or not.
  • The most crucial requirement is that the primer be oil-based. Metal can only be painted with the oil-contained primer.
  • To begin, put the first coat of the primer to the metal that has been entirely dried. Before applying a second coat, allow the primer to dry.
  • The manufacturer’s recommended curing time is what you should follow. Please don’t use your eyes or hands to tell if it’s already dry.
  • Now, the metal is all set for painting after two coats of priming have dried. We recommend using an oil-based primer to keep avoid rusting.

If you already have tough rust pits, this primer will not be able to remove them with sanding. Rust can’t spread any farther thanks to the entire coating of this product.

Your metal will be protected from harmful chemicals and other environmental factors thanks to the’s weather- and corrosion-resistant design.

Because it’s a flat white, any colorful coat of acrylic applied thereafter will shine even brighter because of its brilliance. It’s easy to apply primer, and there’s no need to thin it because it comes with the right consistency.

The 8oz and 12oz spray cans are both available. 32oz cans are also available for those who prefer to apply it by hand or with a spray gun. The drying period for acrylic paints is between two and four hours.

When working with metal, it is best to apply a second coat of primer. This is due to the metal’s high oxidation susceptibility. Use two layers of primer to protect your surface from abrasion and chemical exposure. A double-coat primer helps your paint adhere to the surface more effectively.

Painting

Apply the paint once your metal has been primed and dried. Regular acrylic paint can be used to paint indoor objects. However, don’t forget to purchase outside paint.

Spray or liquid acrylic paint is also available. Paint the metal using a paintbrush or spray can as directed on the bottle. Make sure you use a sealer after painting if you’re using acrylic spray paint.

Regardless of which method you pick, apply two equal layers of paint and let them dry completely between coats. Spray paint can take as many as seven thin applications to cover a surface completely. Do a last check on the drying duration of your goods.

If you’re painting using a brush, take care not to overfill the bristles. Doing so could result in a thick and sloppy paint job.

Tape off any areas you don’t want to paint with painter’s tape before getting started on your project. Allow the first color to dry completely before moving on to the next if multiple colors are used. Like putting a logo to metal, you may paint the first coat one color and then cover it with a second.

The artwork should be placed somewhere safe to dry after you’ve finished. Do not handle the freshly painted item for 48 hours after it has been painted.

Keep Reading: Guide On Paint Gallon Weigh Calculations

Sealing The Paint

Sealing your acrylic paint is a good idea. Exterior acrylic paint should not be used on objects that are subjected to moderate to heavy damage.

Sealants are already included in the mix of acrylic paint suited for outdoor use. As a result, its coat is highly durable and resistant to a wide range of chemicals and environmental factors, including UV light.

Acrylic paints intended for indoor or general-purpose use, on the other hand, do not contain a sealer.

When a sealer is sprayed over the paint, it protects it from flaking, chipping, scuffing, ultraviolet, and moisture damage. To get the desired look, you may also need a suitable sealer.

Brush Or Spray: Which Is Better?

Acrylic paint may be applied on metal using a roller, brush, or spray can. Because it gives the painter a lot of leeway in terms of method selection, this is a terrific thing for the industry. As a general rule, you can choose which application technique you choose.

Using a brush and a spray can be helpful in some situations. As an example, spray paint can be used to cover a metal table in white completely, but if you later want to take advantage of intricately painted features, you can use a brush.

The acrylic spray is available from a number of manufacturers, some of which are designed expressly for metal and are hence suitable for outdoor use. A spray is the best option if a huge project requires heavy-duty paint on a metal surface.

Expert’s Tips For Painting Metal

  • The water-soluble nature of acrylic paint means you should always wash brushes while they’re still wet with paint.
  • When using acrylic paint, it’s best to wear old clothes or protective garments to avoid getting paint on your clothes.
  • Make sure to paint the first layer of acrylic with a different color and let it dry before adding the second coat of acrylic paint.
  • Before purchasing acrylic paint, do extensive research to ensure that you get the right product for the job at hand. You can save time and effort by using a primer of the same compay, which eliminates the need to double-check the paint’s compatibility with the primer.
  • Rust-resistant surfaces can be achieved with the right use of the primer.
  • Many people are allergic to acrylic paints because of their strong odors. While performing DIY painting project, be sure to use a face mask. Work in a well-ventilated location since particles of paint and rust can be dangerous to your health.
  • Keep in mind that it will take 36 to 48 hours for the last layer of paint to properly dry. To avoid damaging the painted surface, perform your project in a secluded area away from the painted surface.

Keep Reading: Detailed Guide On Using Base Paint Without Tint

Final Verdict

This is all about our comprehensive guide on your question “can you use acrylic paint on metal” to help you with painting metal. We have covered all areas, including why you need to paint the metal, types of painting you must pick, how to pick the right paint, and of course, the process of painting.

If you follow this guide correctly, we hope that you wouldn’t have any problem painting metal for your purposes. Just make sure that the paint you are using is not very toxic to harm the environment and keep yourself protected with safety gear as well.

Photo of author

Shelley Stevenson

Shelly Stevenson is the full-time editor responsible for painting, flooring, bathrooms & home climate coverage at StyDomIo. She is a home improvement expert with an eye for design and the skills to get the work done. She knows what turns a house into a home and has the advice and ideas to make upgrades easy and fun.

Leave a Comment

Explore Us

About Us

StayDomIo Logo

At StayDomIo.com, we have a team of professional industry experts to help you find guides on painting, finishing, flooring, bathroom & kitchen to make your home look stunning. We have tested, researched & written hundreds of buying guides to help you select the top notch & affordable product out there!

Disclosure

StayDomIo.Com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.