How Many Coats Of Primer On Wood? [Definitive Guide]

In this detailed article, we will discuss how many coats of primer on wood are required along with how to prime wood properly, and much more.

When it comes to the proper wood finishing technique, one of the most important focus areas is priming. No matter where you are in your woodworking career, the subject will arise eventually.

To get started on this primer issue, how many coats should be applied? The answer isn’t simple, and there’s no blanket number that can possibly work.

Many factors come into play when it comes to determining the correct number of primers on wood. These variables include what type of primer is used, the quality of the primer, and how it has been applied.

Primer is not magic paint that will save you from all your mistakes; if you build a surface with flaws, they’ll still show through. Sometimes priming is your last chance to fix a mistake, and you only get one shot!

That’s what makes matching the right amount of primer coats such an intimidating task. If it’s too thick, it can create ridges and bubbles; if it’s too thin, you’re wasting time and money on unnecessary layers.

How do you know if your primer is too thick or thin? What kind of mistakes do you need to watch out for when using it on wood? How many coats of primer on wood are required? Keep on reading, and we’ll cover all of these questions and more.

Things To Know About Priming Wood?

When it comes to preparing wooden surfaces for painting, there’s more to consider than just the primer coats. There are several other factors that will impact your wood finishing results, and finding consistency is key to avoiding mistakes. That’s where the following questions come in. Be honest with yourself, and you’ll quickly find out if you’re getting what you need!

Unfinished Wood Or Previously Painted Wood

The first step when determining the number of coats of primer necessary for wood is to determine whether your surface is unfinished or if it has been previously painted.

If the wooden object in question was already coated with a finish, it might be worth trying to match that paint color and tone instead of going straight for a contrasting look.

There’s no need to perfectly match the color since priming will help tone things down a bit. Applying a straight primer coat might lead to a shiny, overly uniform surface.

When painting over an existing finish, you’ll have to determine if it’s worth going through another round of finishing or if one coat of primer should be enough.

Sometimes, especially on the exterior of your wooden object, the previous paint job was done on a porous piece of wood.

If that’s the case, two coats of primer might suffice since you’re not likely to see the texture of the finished product.

If it has been determined that applying one coat of primer will do, be sure to sand lightly before painting so that you can create a smooth finish.

When working with unvarnished wood, you’re going to need more than one coat of primer to cover up all the flaws.

If you only apply one coat and it doesn’t cover well, you’ll need to add another. The good news is that you don’t need to sand in between coats, as long as it’s dry.

Whether you’re dealing with hardwood, softwood, or laminate flooring, applying the correct number of primer applications will guarantee that the new color is retained to a great extent.

Keep Reading: Read Reviews On Wood Epoxy Resins

Color And Quality Of Wood

The quality of the wood is another significant factor when deciding how many coats of primer you’ll need on wood. If you’re working with high-quality pieces, it may not be necessary to apply more than one coat of primer.

High-end furniture or intricate wooden projects are perfectly smooth and ready for paint without any additional work. Don’t assume that the better the quality of the wood is, the fewer coats of primer you need.

Even if your furniture is smooth and flawless, one or two coats might be enough; but three to four coats is not unheard of.

The color and tone of the piece will factor into how many coats it takes as well. If your wooden object has a lot of color differences, it’s best to start with one coat and then build up.

You might need several coats before that darker or duller tone is gone for good! Whatever you do, don’t skip around the process.

Applying primer randomly will not only lead to a bumpy finish but can also damage your paint job later on.

Again, keep in mind that if you want your paint to resemble the intended finish as closely as possible, you should work with the wood in its current condition and base your primer coats on it.

Where Is The Wood Thing Going To Be Set?

Do you plan on placing your wooden object outside or indoors? You’ll need to consider the climate it’s going to be exposed to.

If it’s an outdoor piece, whether on the patio or in storage, you’ll want several coats of primer. Since the piece will be exposed to water and weather conditions, you risk causing damage if only one coat of primer is applied.

If the piece is going to be used indoors, your project options open up a bit more. A light primer coat will suffice on new pine or oak pieces that are not overly dark. For darker woods or priming over an existing finish, two coats of primer should do the trick.

Restoration projects and antique pieces may also need to be primed with two coats unless it’s a high-quality piece that has been previously painted. Since you don’t want the primer coat to show through, add another just to be safe!

If you’re thinking about staining your wood after priming, don’t prime it at all! Start with bare wood and add a couple of coats of stain. If you want to add paint after the color has been added, be sure to use an oil-based or shellac primer so it can accept both types of paints.

Since painting is such a meticulous process, always err on the side of caution and go for more primer than not enough. Don’t skimp on the primer coat unless you enjoy getting ready to paint all over again!

Keep Reading: Detailed Reviews On Kitchen Cabinet Primers

What Type Of Paint Are You Using?

The type of paint you’re applying is another big factor in determining how many coats of primer are necessary. Latex paints are always the best choice since they dry quickly and can be wiped off.

If you’re using oil-based paints, adding two coats of primer will help cut down on the number of coats needed on your wooden object. With oil paints, it’s always best to apply a primer for the best results.

If you’re painting with latex paint, make sure you have a latex primer as well. You can always be sure to get that gloss finish, a new finish with a latex primer.

If you’re using shellac instead, one coat of primer is enough if you want to cover up dark stains or wood tones. For lighter color woods that are unstained, shellac needs only one coat of primer before painting.

Although all paint will likely require two coats after priming, shellac is the most forgiving of all since it’s not affected by excess moisture.

Knowing how many coats of primer are needed for your wood project can be one of the most complex parts of getting ready to paint. It might take some trial and error before you get it down!

If you’re an experienced DIYer, four coats of primer on new pine or oak pieces won’t be anything new. If this is your first time painting, err on the side of caution and go for more primer than less.

What Type Of Primer Should You Use? Types Of Primers

The best primer to use in any situation is a water-based primer. Latex, acrylic, and shellac primers can be used on different types of wood.

Water-based primers are by far the most versatile since they won’t damage your silicone sealant, and they’ll stick to almost anything!

Latex primers work great with wood sealant since they can actually strengthen your material. They also work on just about any type of wood using either oil-based or water-based paints.

If you’re looking to prime with something that is entirely compatible with silicone, acrylic primers are the way to go!

This is because acrylic primer has a chance of deteriorating your silicon gasket, which can cause leaks. These primers are best used with oil-based paints as well as brushes and rollers.

Shellac primers can be used on almost any type of wood, although they work best with dark stains or varnish. Shellac is a tremendous long-term sealant that works even underwater!

Because of the way these primers work, we advise using a latex primer for new wood and/or dark stains. If you’re painting over existing finishes or applying it to lighter colored woods, use shellac to ensure that your paint will stick.

When it comes to picking your primer, you should consider the type of paint you’re using. Most likely, you’ve already chosen your paint, so your primer should match it instead of the other way around.

Keep Reading: Countertop Paint Kits Reviewed By Experts

Oil Based Primer

Oil-based primer is a type of paint that is made to stick to surfaces better than other types of paint. It’s also designed to fill in small cracks or imperfections in the surface that it’s applied to, which makes it a good choice for priming wood.

The oil-based primer should always be used when you’re planning to paint over wood that has been stained or finished with a gloss. This type of primer will help the paint to stick better and last longer.

One thing to keep in mind when using an oil-based primer is that it takes longer to dry than other types of primer. This means that you’ll need to wait longer between coats, so be sure to plan ahead!

Shellac Primer

Shellac primer is a type of primer that is made from shellac. It is a clear primer that is applied to the wood before painting. Shellac primer can be used on both interior and exterior surfaces.

It is essential to use shellac primer before painting wood because it seals the wood and helps the paint adhere to the surface.

Shellac primer is available at most hardware stores. Shellac is a popular choice for primers because it can be applied with either rollers or brushes.

It’s important that you make sure the surface has been cleaned and dried before applying this product, as too much humidity will cause sagging once Shellack dries down completely- which means paint jobs may not last as long!

Latex-Based Primer

Latex-based primer is one of the most popular primers on the market. It can be used on a variety of surfaces, including metal, plastic, and wood. It dries quickly and forms a strong bond that helps to prevent peeling and bubbling.

Latex-based primer is also water-resistant, which makes it ideal for use on outdoor surfaces. This type of primer is often called “stain-blocking” because it prevents stains from sinking into the surface, which allows you to skip one of the coats on top.

An important thing to note about latex-based primer is that it can be used on both gloss and flat surfaces, but sometimes the results vary slightly. You can also read our comparison guide on stain vs gloss finish.

Paint & Primer Mixed Together

You can also go with a paint and primer in one, often referred to as “paint and primer in one.” This is typically for small projects since smaller areas can be covered quickly. These are often lower in cost but eventually require two coats of paint to cover the primer. This saves time but with higher costs in the long run.

How Many Coats Of Primer On Wood You Should Apply?

The amount of coats required for your primer is also dependent on what type of paint you are using. You will need to apply at least two coats of either oil-based or latex primers when painting over dark stains or varnished wood. For lighter-colored woods that aren’t stained, one coat should be sufficient.

If you’re painting over existing finishes, two coats are necessary to get the best results. This is because primers can help hide previous grime and discoloration that has occurred on your wood.

If you want to use shellac, then one coat should be sufficient if you’re looking for a long-lasting sealant. If this is your first time painting, then err on the side of caution and apply two coats to ensure that your primer will hold.

Before painting over a previous coat of paint, you need to make sure that it is fully dry. Failure to do so could leave your new coat of primer peeling from the old layer. Give everything ample time to dry before continuing with anything else.

As you can see, how many coats of primer are needed is dependent on the type of paint that you’re using and what kind of wood you’re painting. If this is your first time painting or if you want to make sure that your primer will hold, apply at least two coats before moving on to anything else!

When using a dark piece of wood, it’s important to prime the surface before painting. If you don’t do this and apply only one coat of light color paint over the top, the original tone will show through in many places because colors reflect off each other differently depending on their shades or tones vs just flat out looking greasy!

You’ll probably need two applications for starters since most surfaces require at least 2-3 thin layers prepainted with something gritty enough so that particles settle onto any cracks which may exist within them during the production process.

What Happens If I Don’t Use Enough Primer Coats?

One of the biggest problems with using too few coats of primer is that you can often see the old paint or wood coloring through your new coat of paint. This will make the object look as if it has not been painted well and may also cause people to think that you are a novice painter!

The other problem with using too few coats of primer is that your paint may not last as long, and it can even peel off in some situations.

For example, if you were to use too few coats of primer when painting over a dark piece of wood, the old color or stain may be able to show through, causing people to think that you haven’t painted it well.

If your paint starts to peel, you will need to remove all of it and start again with your primer. If you don’t use enough coats of primer, the paint that is on the wood will not be able to hold onto the wood properly, which can cause peeling or chip later down the road.

Using too few coats of primer may also mean that you will need to paint your piece of wood more often as it may not be able to withstand the wear and tear over time.

What Happens If I Use Too Much Primer?

Too much primer could also have a negative effect on your paint. It depends on what type of primer you’re using as well as the number of coats that were applied.

If you are using oil-based primer, then too much can cause fading and yellowing over time. This is because oil-based primers have a tendency to break down over time. If this is the case, then your paint will not be able to adhere properly and may peel or chip off of your wood.

If you decide to use too much latex primer, this could cause bleeding of the paint through the top layer. As well as this, if you fail to allow for proper drying time between coats of primer, then the latex could have a negative effect. In this case, the paint would not be able to adhere properly and may chip off of your wood.

In order to prevent either situation from occurring, you only want to apply two coats of primer on your wood at a time. You also need to ensure that there is time for adequate drying between each coat.

How To Prime Wood

The steps of priming wood are really quite simple. Below we have provided some tips to help ensure that your wood is primed correctly.

Assemble The Supplies

The very first step is to make sure that you have the supplies needed. Below we have listed the supplies that you will need and how many to get started.

  • Primer
  • Several brushes (different for primer and paint)
  • Plastic cover
  • Paint
  • Sandpaper
  • Painting mask

Sanding The Wood Properly

The next step is to sand the wood properly. When doing this, you don’t want to use too much pressure because it can cause gouging in the wood, which will make it harder for the primer and paint to adhere properly.

You should also sand with the direction of grain at a maximum of 80 grit or 36 µm. If you don’t sand in the direction of the grain, then it will be much harder for you to achieve a smooth finish.

After sanding your piece of wood, make sure that all dust from the sandpaper is gone. You don’t want any loose dust when applying primer because this can cause blotches in your paint job.

If there are any deep gouges in your wood, then you may want to make them slightly smoother using a fine-grit sanding sponge.

This should be done by hand and not with any power sander. Be very careful when doing this, as it can be easy to take off too much wood or accidentally cause more scratches in the wood if not applied correctly.

Cleaning The Wood

Once you have sanded the piece of wood, then you will need to clean it using a tack cloth or damp rag. Make sure that any dust from your sandpaper is removed at this point. If you are dealing with unwanted spray paint on wood read this guide to remove it.

Some people recommend using wax and grease remover to get rid of any grime on the wood’s surface before painting; however, if there isn’t too much grime on the wood, then you can skip this step.

After, wipe down your wood to remove any excess dust or residue that is left over from the cleaning process. If there is any dust left behind, then it will show up as a patchy area in your primer and paint job, so make sure it’s completely clean before continuing to the next step.

At this point, you want to give the wood one more wipe down with a damp rag to ensure that it is completely clean before continuing to the primer stage.

Applying The First Coat Of Primer

Once your wood is clean and sanded, you can begin applying the first coat of primer. Make sure that it is an oil-based primer so that it will be compatible with oil-based paints. If not, then you will need to use a latex primer which may cause an issue in the future when trying to paint over it.

Be sure to read the label of your primer so that you can determine how long you need to wait until it is safe for paint. Usually, oil-based primers will provide a time frame in which you need to wait before applying paint, while latex primers do not have this requirement.

The first coat of primer should be thin and even. You do not want to see any thick lines or pools of primer, as this can cause unwanted drips and runs in your paint.

You should be able to tell if you’re applying the primer too heavily by looking at the amount of sheen on the wood. If it looks glossy, then you need to apply a thinner coat so that it will appear smoother when finished.

You will want to apply a light coat of primer onto the wood in a smooth and even motion. This can be done using a brush, roller, or sprayer. Make sure that your strokes are going with the grain in order to prevent leaving any streaks on the surface of your wood.

To help avoid running, start by doing a few vertical strokes and then horizontal. This way, if there is any primer that starts to drip down the side of your wood, it will run vertically and not horizontally across the surface.

Applying The Second Coat Of Primer (Optional)

Now that you have applied the first coat of primer, you may want to consider applying a second coat. This is optional based on whether or not the wood needs it.

Some people do not bother with a second coat because they believe that priming twice will increase your chances of showing brush strokes in your finished paint job. If this is something that you’re worried about, then you can apply a second coat of primer to reduce those chances slightly.

If the first coat already appears smooth and even with no brush strokes, then there is no need for a second coat. It will only make your job more difficult and time-consuming without any added benefit.

However, if after applying the first coat of primer you notice that there are still some areas that have not been covered or that need more coverage, then you should apply another coat of primer to those sections.

It is important to note, however, that if you feel like your piece of wood needs a second coat, it may be because the first coat was applied too thinly rather than giving it another coat of primer.

If the first coat of primer didn’t cover enough areas or if there are still some marks visible on the surface, then you need to add more layers and sand before applying another layer of primer. Otherwise, you will be wasting your time by continuing to apply coats that you know will not be sufficient when finished.

Finally Apply The Paint

Once you have been satisfied with the coat of primer on your wood, then it is time to apply paint. Remember that oil-based paints need an oil-based primer, and latex paints need a water-based or latex primer, depending on what type of paint you will be using.

Before applying the final coat, make sure that the first one is fully dry. This will ensure that there is no discoloration or imperfections on the surface of your piece because you applied the paint too soon.

Once finished, make sure to apply a thin coat of paint which will help minimize any potential brush marks if they do appear. Once this coat has dried out, then you can apply the final coat of paint.

Final Verdict

In this article, you have learned all about how many coats of primer on wood are required and how to properly apply the primer on wood whether you plan to paint your piece using oil-based or water-based paints.

We hope that these tips will help guide you through the process so that it goes smoothly. If there is anything at all that isn’t clear from our detailed guide, then please feel free to reach out for a consultation with one of our experts!

Photo of author

Shelley Stevenson

Shelly Stevenson is the full-time editor responsible for painting, flooring, bathrooms & home climate coverage at StyDomIo. She is a home improvement expert with an eye for design and the skills to get the work done. She knows what turns a house into a home and has the advice and ideas to make upgrades easy and fun.

Leave a Comment

Explore Us

About Us

StayDomIo Logo

At StayDomIo.com, we have a team of professional industry experts to help you find guides on painting, finishing, flooring, bathroom & kitchen to make your home look stunning. We have tested, researched & written hundreds of buying guides to help you select the top notch & affordable product out there!

Disclosure

StayDomIo.Com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.